topleft.jpg (5685 bytes) PI963fixes.jpg (9197 bytes)

General Information

  • The HU-961 comes standard with Pin 3 as a dry contact closure to ground to allow the user to interface his own program interrupt switch.   When using HollyAnne's PI-963, by changing that jumper causes Pin 3 to have 9 volts on it when it goes low.  This is what we use to power up the PI-963. 

NOTE:   Refer to the Installation Instructions or online diagram for the PI-963 Router (Figure 7), for the wiring procedure.


[Home] [Broadcast Products] [Cable Products] [Fixes] [Support] [Updates]
[Sales] [Info] [Search]

Copyright © 2002 HollyAnne Corporation