Using More Than Two PI963

Using More Than Two PI-963's

The 9 volts used from Pin 3 on the HU-961 to power up the PI-963 will interface two PI-963 units. If more than two PI-963's are used from the same HU-961, the jumper should be changed back to allow Pin 3 to be a dry contact closure to ground and an external power supply with output of 9 volts DC 500mA needs to be used for the PI-963. This power cube should be wired in parallel with the PI-963 routers as illustrated in the lower diagram of the Installation Instructions for the PI-963 Router (Figure 7).

[Home] [Broadcast Products] [Cable Products] [Fixes] [Support] [Updates]
[Sales] [Info] [Search]